Reading A File; Example 5-15 More - HP AlphaServer TS15 Owner's Manual

5.17 Reading a File

The more command displays a file one screen at a time.
Example 5–15 More
>>> more el
starting console on CPU 0
initialized idle PCB
initializing semaphores
initializing heap
initial heap 240c0
memory low limit = 1be000 heap = 240c0, 17fc0
initializing driver structures
initializing idle process PID
initializing file system
initializing timer data structures
lowering IPL
CPU 0 speed is 1000 MHz
create dead_eater
create poll
create timer
create powerup
access NVRAM
Testing Memory
...
probe I/O subsystem
starting drivers
entering idle loop
initializing keyboard
--More-- (SPACE - next page, ENTER - next line, Q - quit)
port dqa.0.0.13.0 initialized
port dqb.0.1.13.0 initialized
device dqa0.0.0.13.0 (DW-224E) found on dqa0.0.0.13.0
device dka0.0.0.8.0 (COMPAQ BB00912301) found on pka0.0.0.8.0
device dka100.1.0.8.0 (COMPAQ BF03665A32) found on pka0.1.0.8.0
sense key = 'Unit Attention' (29|02) from dka0.0.0.8.0
Change to Internal loopback.
Change to Normal Operating Mode.
Change to Internal loopback.
Change to Normal Operating Mode.
>>>
Using Firmware 5-27