Status Leds On Front Access Drives; Figure 4-6 Leds On The Front Access Drive (Front View) - HP AlphaServer TS15 Owner's Manual

12. Pull the two spring-loaded pull pins
into place.
13. Replace the top cover and reassemble the system enclosure as explained at the end of
Section 4.2.
14. Turn on system power by pressing the power switch on the operator control panel. Boot
the operating system.
4.4

Status LEDs on Front Access Drives

Storage drives in the optional front access storage cage provide three status LEDs that
display activity, power, and drive fault. The following figure shows the position and
purpose of these LEDs.
Figure 4–6 LEDs on the Front Access Drive (Front View)
LED Status
Green indicates activity.
Green indicates drive state.
Amber indicates drive state fault.
and lower the storage bay until the pins snap
MR0308B
Installing and Configuring Options 4-9