HP AlphaServer TS15 Owner's Manual page 216

disable warning
When the disable warning command is issued, warning-level events no longer generate
system alerts (this is the default state).
disable wdt
The command disable wdt disables the operating system watchdog timer. This does not
disable the operating system from providing the watchdog clock; it simply prevents the
RMC from monitoring it. See the enable wdt command.
enable alert
The enable alert command enables the RMC to page the system operator. Before the
enable alert command can be used, the system must be configured for remote dial-in and
dial-out. See sections 6.7 and 6.8.
enable fan
The enable fan command allows the RMC to power off the system in the event of a fatal fan
failure condition (the default state) after a 3-minute lapse.
enable modemdef
The enable modemdef command instructs the RMC to append additional fixed commands
to the user-supplied modem initialization string. These commands were automatically
appended to the initialization string on older AlphaServer or AlphaStation models. See
Table 6–4, which follows.
6-38 hp AlphaServer TS15 Owner's Guide