Table 5-6 Environment Variable Summary - HP AlphaServer TS15 Owner's Manual

Table 5–6 summarizes the most commonly used SRM environment variables. These
environment variables are described in the following pages.
NOTE: The environment variables for setting boot options are described in Chapter 3,
Booting and Installing an Operating System.
Table 5–6 Environment Variable Summary
Environment
Variable
auto_action
bootdef_dev
boot_file
boot_osflags
com1_baud
com2_baud
console
eg*0_mode
ei*0_mode
ew*0_mode
eg*0_protocols
ei*0_protocols
ew*0_protocols
5-40 hp AlphaServer TS15 Owner's Guide
Function
Specifies the console's action at power-up, a failure, or a reset.
Specifies the default boot device string.
Specifies a default file name to be used for booting when no file
name is specified by the boot command.
Specifies the default operating system boot flags.
Sets the baud rate of the internal COM1 serial interface.
Sets the default baud rate of the COM2 serial port.
Specifies the device on which power-up output is displayed
(serial terminal or VGA monitor).
Specifies the connection type of the default Ethernet controller.
Specifies network protocols for booting over the Ethernet
controller.