Language - HP AlphaServer TS15 Owner's Manual

5.20.5

language

The language environment variable specifies the keyboard layout, which depends on
the language. The setting of the language environment variable must match the
language of the keyboard variant.
The factory keyboard setting is 36 English (American).
The value of language takes effect only after you reset the system by pressing the Reset
button (if configured) or issuing the init command. (Jumper J22 pins 13-14 must be inserted
for the halt/reset button to operate as a reset button.)
The syntax is:
set language language_code
The options for language_code are:
0 No language
30 Dansk (Danish)
32 Deutsch (German)
34 Deutsch (Swiss)
English (American)
36
38 English (British/Irish)
3A Español (Spanish)
Français (French)
3C
3E Français (Canadian)
40 Français (Suisse Romande)
Example
The following command sets the language environment variable to Italian.
>>> set language 42
42 Italiano (Italian)
44 Nederlands (Netherlands)
46 Norsk (Norwegian)
48 Portugues (Portuguese)
Suomi (Finnish)
4A
4C Svenska (Swedish)
4E Belgisch-Nederlands (Dutch)
Japanese (JIS)
50
52 Japanese (ANSI)
Using Firmware 5-47