Error Beep Codes; Figure 7-2 Circuit Breaker On Power Supply; Table 7-3 Error Beep Codes - HP AlphaServer TS15 Owner's Manual

7.2

Error Beep Codes

Audible beep codes announce specific errors that might be encountered while the
system is powering up. Table 7–3 identifies the error beep codes.
Table 7–3 Error Beep Codes
Beeps Message/Meaning
1 Done with execution; jumping to console
1-3-3 No usable memory available
2-1-2 Configuration error detected
1-1-4 ROM checksum error detected
1-2-4 Bcache error detected
Figure 7–2 Circuit Breaker on Power Supply
7-4 hp AlphaServer TS15 Owner's Guide
1
MR0667
Action to Repair
No action necessary.
Check memory and memory
configuration.
Check system configurations.
Replace the system board.
Possible CPU problem.