Srm Command Summary; Table 5-1 Summary Of Srm Console Commands - HP AlphaServer TS15 Owner's Manual

5.2

SRM Command Summary

Table 5–1 summarizes alphabetically the most frequently used SRM console
commands; Table 5–2 gives the command notation formats; and Table 5–3 shows
special characters used on the command line.
Table 5–1 Summary of SRM Console Commands
Command Function
Boot Loads and starts the operating system.
clear envar Resets an environment variable to its default value.
Resumes program execution on the processor.
Continue
Crash Forces a crash dump at the operating system level.
Edit Invokes the console line editor on a RAM script or on the user power-
up script, "nvram," which is always invoked during the power-up
sequence.
halt Halts processor. (Same as stop.)
help (or man) Displays information about the specified console command.
command
init Resets the SRM console and reinitializes the hardware.
login Turns off secure mode, enabling access to all SRM console commands
during the current session.
more [filename] Displays a file one screen at a time.
set envar Sets or modifies the value of an environment variable.
Displays the state of the specified environment variable.
show envar
stop Halts the processor. (Same as halt.)
test Verifies the configuration of the devices in the system.
5-4 hp AlphaServer TS15 Owner's Guide