Table 7-1 Ocp Switches; Table 7-2 Ocp Led Indications - HP AlphaServer TS15 Owner's Manual

Table 7–1 OCP Switches
Switch Function
Halt/Reset
System Power Switch (On/Off)
Table 7–2 OCP LED Indications
LED Color
Green
Green
Amber
Amber
Amber
and
Amber/blink
in unison
Amber/blink
in unison
Amber
Amber/blink
sequentially
LED On Function
System power is on.
There is disk activity.
There is a fan fault.
The system is over temperature.
There is a system fault.
RMC image is corrupted but the system is not in
emergency runtime image recovery mode or emergency
runtime image recovery mode has timed out. If recovery
has timed out, unplug the system power cord and wait
until the LED on the PCI Riser card turns off. Plug in the
power cord and try again.
System is in emergency runtime image recovery mode
and is awaiting firmware update.
RMC has failed or the system is configured for
emergency runtime image recovery but is not powered on.
Firmware update is in progress.
Troubleshooting 7-3