Table of Contents
Advertisement
CDM-600L Satellite Modem
Front Panel Operation
6.3.6
UTILITIES
UTILITIES:
LAMP
Select the Utilities parameter using the [←][→] arrow keys, then press ENTER
6.3.6.1
UTILITIES: SET-RTC
TIME: 12:00:00
To edit the time and date settings of the REAL-TIME CLOCK, select the digit to be edited
using the [←][→] arrow keys, change the value of the digit using the [↑] [↓] arrow keys,
then press ENTER.
IMPORTANT
6.3.6.2
UTILITIES: BRIGHTNESS
To edit the display BRIGHTNESS, use the [↑] [↓] arrow keys. Press ENTER when the
brightness is suitable. Note that the values of brightness that can be selected are 25%, 50%,
75% or 100%.
6.3.6.3
UTILITIES: LAMP
Select enable or disable, using the [↑][↓] arrow keys, then press ENTER.
This will test all of the LEDs on the front panel then resume normal operations.
SET-RTC
1:1-MANUAL-SWITCH
EDIT REAL-TIME CLOCK:
Note that in accordance with international convention, the date is shown
in DAY-MONTH-YEAR format.
EDIT DISPLAY BRIGHTNESS:
100%
FRONT PANEL LAMP TEST: DISABLED
(ENABLED, DISABLED)
DISPLAY-BRIGHTNESS
EDIT-CIRCUIT-ID
DATE: 24/04/01
6–40
Revision 2
MN/CDM600L.IOM
.
Advertisement
Table of Contents
