Table of Contents
Advertisement
CDM-600L Field Installation Instructions
KT/11202-1 External 20 dB Step Attenuator Kit
Command
Arguments
(Instruction
for Command
Parameter
Type
Code and
or Response
Qualifier)
to Query
Equipment ID
N/A
10 bytes
Description of Arguments
Query only.
Unit returns the equipment identification and installed options
information, in the form abbbcdefgh;
where:
a=Turbo codec
0=None, 1=Lo-Rate Turbo, 2=Hi-Rate Turbo.
bbb=defines the modem model number:
600 is the CDM-600
601 is the CDM-600L (this case)
602 is the CLM-9600L
c=Data Rate Option:
0=Base (to 5 Mbps), 1=to 10 Mbps, 2=to 20 Mbps.
d=Higher-order modulation option:
0=None, 1=8-PSK, 2=16-QAM, 3=8-PSK and 16-QAM.
e=Framing option:
0=None, 1=IBS, 2=IDR, 3=IBS and IDR, 4=IBS with high-rate
ESC, 5=IBS with high-rate ESC and IDR.
f=Drop and Insert/Audio mode
0=None, 1=D&I, 2=Audio, 3=D&I and Audio.
(Note: D&I FAST option provides access to both Open Network
D&I and Closed Network D&I++)
g=Special Options:
0=None, 1=Opt1, 2=Opt2, 3=Opt 1 and 2.
h=External 20dB Attenuator:
0=None
1=Attenuator attached
Example: EID=2601213301 indicates CDM-600L, Turbo 2 codec
installed, 8-PSK/IDR/IBS, D&I, Audio, data rate to 20 Mbps,
external attenuator installed.
Response to
Command
N/A
8
Query
(Instruction
Response to Query
Code and
Qualifier)
EID?
EID=abbbcdefgh
(see description of
arguments)
601 indicates the CDM-
600L
Advertisement
Table of Contents
