Table of Contents
Advertisement
CDM-600L Satellite Modem
Remote Control
Command
Arguments
(Instruction
for Command
Parameter
Type
Code and
or Response
Qualifier)
Offline Unit
N/A
6 bytes
Status
Description of Arguments
to Query
Query only. (1:1 set-up)
This query is sent to the online modem of a 1:1 pair. It provides
access to the fault status information (FLT?) of the offline
modem. This is the only way to interrogate the status of an offline
modem at the distant-end of a link.
The response format may be:
No1fr1 which indicates that no 1:1 system has been
detected. Presence of a 1kHz signal from the CRS-150
is used to indicate a 1:1 set-up.
NoComm which indicates that a 1kHz signal has been
detected, but that there is no (or not yet) a response from
the modem.
abcdef would be the FLT? response information from
the offline unit.
Response to
Command
N/A
16–32
Revision 2
MN/CDM600L.IOM
Query
(Instruction
Response to Query
Code and
Qualifier)
OUS?
OUS=xxxxxx
(see Description of
Arguments)
Advertisement
Table of Contents
