Table of Contents
Advertisement
CDM-600L Satellite Modem
Remote Control
Command
Arguments
(Instruction
for Command
Parameter
Type
Code and
or Response
Qualifier)
Rx FEC Code
RCR=
1 byte, value
Rate
of 0 thru 7
Rx Data Rate
RDR=
9 bytes
Description of Arguments
to Query
Command or Query.
Rx FEC Code Rate, where:
0 = Rate 1/2
1 = Rate 3/4
2 = Rate 7/8
3 = Rate 2/3 (8-PSK TCM or LDPC only)
4 = Rate 1/1 (Uncoded or No FEC)
5 = Rate 21/44 (Turbo Only)
6 = Rate 5/16 (Turbo Only)
7 = Rate 0.95 (Turbo Only)
Depending on FEC type, not all of these selections will be
valid.
Example: RCR=1 (selects Rate 3/4)
Command or Query.
Rx Data Rate, in kbps, between 2.4 kbps to 20 Mbps.
Resolution=1 bps
Example: RDR=02047.999.
For Hardware Version 2.0 or higher, and Firmware 1.3.1 or
higher, additional auxiliary G.703 sub-rates are available.
These are selected using:
00512.AUX
01024.AUX
02048.AUX
The connectors used for the Aux rates are IDI/DDO.
The Aux rates are not available with Drop & Insert or IDR.
Response to
Command
RCR=
RCR?
RCR*
RCR#
RDR=
RDR?
RDR*
RDR#
16–15
Revision 2
MN/CDM600L.IOM
Query
(Instruction
Response to Query
Code and
Qualifier)
RCR?
RCR=x
(see description of
arguments)
RDR?
RDR=xxxxx.xxx
(see description of
arguments)
Advertisement
Table of Contents
