Table of Contents
Advertisement
CDM-600L Satellite Modem
Front Panel Operation
The function of these keys is as follows:
ENTER
This key is used to select a displayed function or to execute a modem configuration change.
CLEAR
This key is used to back out of a selection or to cancel a configuration change which has not
been executed using [ENTER]. Pressing [CLEAR] generally returns the display to the previous
selection.
Left, Right
These arrows are used to move to the next selection or to move the cursor functions. At times,
they may also used to move from one section to another.
[←], [→]
Up, Down
These arrows are used primarily to change configuration data (numbers). At times, they may
also be used to move from one section to another.
[↑], [↓]
The keypad has an auto-repeat feature. If a key is held down for more than 1 second, the
key action will repeat, automatically, at the rate of 15 keystrokes per second. This is
particularly useful when editing numeric fields, with many digits, such as frequency or data
rate.
IMPORTANT
Figure 6-2. Keypad
6–3
Revision 2
MN/CDM600L.IOM
Advertisement
Table of Contents
