Chapter 1. Introduction; Figure 1-1. Cdm-600L L-Band Satellite Modem - Comtech EF Data CDM-600L Installation And Operation Manual

Open network satellite modem (2.4 kbps – 20 mbps)
Hide thumbs Also See for CDM-600L:
Table of Contents

Advertisement

Chapter 1. INTRODUCTION

The CDM-600L (Figure 1-1) is an Open Network Satellite Modem, intended for both
Intelsat and closed network applications.
It is compliant with IESS-308/309/310/315 specifications, but also adds
significant other features in closed network modes.
It offers variable data rates from 2.4 to 20 Mbps, in BPSK, QPSK, Offset QPSK,
8-PSK, 8-QAM and 16-QAM modes. Viterbi, Sequential, concatenated Reed-
Solomon (RS), Trellis Coded Modulation (TCM), Turbo Product Coding (TPC)
and Low-density Parity Check Coding (LDPC) are provided as Forward Error
Correction (FEC) options.
A full range of interface types is built in (no plug in cards required) including all
G.703 types, and Drop and Insert (both Open and Closed Network) operation
are available.
The IF frequency range covers 950 – 1950 MHz
It includes a programmable 13, 18, or 24V LNB power supply at the receive IF
connector center conductor, and optionally includes a 24 or 48V BUC power
supply at the transmit IF connector center conductor.
A low phase noise 10 MHz reference output is available at both the transmit and
receive IF connectors for use by the LNB or BUC.
The modem is compact, 1U high and 18 inches deep, and consumes 57 watts
(typical) excluding BUC power supply and LNB power supply loads
It has a front panel VFD display and keypad for local configuration and control,
although it can be fully remote-controlled.

Figure 1-1. CDM-600L L-Band Satellite Modem

1–1
.

Advertisement

Table of Contents
loading

Table of Contents