Comtech EF Data CDM-600L Installation And Operation Manual page 238

Command
Parameter (Instruction for Command
Type Code and or Response
Qualifier)
Tx Symbol N/A 9 bytes,
Rate numeric
Rx Symbol N/A 9 bytes,
Rate numeric
Front Panel FPL= 1 byte,
Lockout numeric
Arguments
to Query
Query only.
This command allows remote access to the Tx symbol rate.
This value is shown on the front panel.
Format is ddddd.ddd
Query only.
This command allows remote access to the Rx symbol rate.
This value is shown on the front panel.
Format is ddddd.ddd
Command or query.
Control the state of front-panel lockout, where:
0 = no lockout
1 = front panel lockout active.
Disable the lockout by either FPL=0, or by setting into local
mode using LRS=0.
Description of Arguments
2
MN/CDM600L.AA2
Query
Response to (Instruction
Response to Query
Command Code and
Qualifier)
TSR? TSR? TSR=ddddd.ddd
TSR= (see description of
arguments)
RSR? RSR? RSR=ddddd.ddd
RSR= (see description of
arguments)
FPL= FPL? FPL=x
FPL? (see description of
FPL* arguments)
FPL#