Table of Contents
Advertisement
CDM-600L Satellite Modem
Front Panel Operation
To edit the Channel Timeslots (CHAN/TS) for either Drop or Insert, press ENTER and
another screen will be shown:
CONFIG: DROP & INSERT: DROP CHANNEL TIMESLOTS
DRP-CH: 1
Select the Time-slot to edit using the [←] [→]arrow keys and edit the value using the [↓]
[↑] arrow keys, then press ENTER. The number of Channels and Time-slots shown
depends on the data rate.
CONFIG: DROP & INSERT: INSERT CHANNEL TIMESLOTS
INS-CH: 1
Select the Time-slot to edit using the [←] [→] arrow keys and edit the value using the [↑]
[↓]arrow keys, then press ENTER.
The number of Channels and Time-slots shown depends on the data rate.
If the data rate is 1920 kbps, then only the E1 formats are available, and the CHAN/TS
menus are disabled. This is the 'fixed channel' mode where all timeslots are allocated in
order.
6.3.1.7
CONFIG: FREQ - REF
REFERENCE CLOCK = INTERNAL
(INTERNAL, 1, 2, 5, 10, or 20 MHz)
Select either an internal 10 MHz Reference or an External Reference of
1, 2, 5, 10, or 20 MHz.
6.3.1.8
CONFIG: EDMAC
EDMAC MODE = MASTER (IDLE/MASTER/SLAVE)
Select either IDLE, MASTER, or SLAVE, using the [↑] [↓] arrow keys, then press
ENTER.
2
3
TS: 01
02
03
2
3
TS: 01
02
03
EDMAC ADDRESS = XXXX
4
04
4
04
6–21
Revision 2
MN/CDM600L.IOM
Advertisement
Table of Contents
