Comtech EF Data CDM-600L Installation And Operation Manual page 60

CDM-600L Satellite Modem
Front Panel Operation
The AUDIO choice permits the user to carry 2 x 32 kbps ADPCM audio as the primary
data. This interface type forces IBS or EDMAC as the available framing types.
The second option is the Framing type.
The TX options are:
•
•
•
•
•
•
•
The RX options are:
•
•
•
•
•
•
•
6.3.1.3 CONFIG: TX
TX-IF: POWER ENCODER MOD DATA
DATA=00064.000kbps
Select the parameters on the top line to be edited using the [←] [→] arrow keys.
Observe the Data/Symbol rates on the bottom line.
Press ENTER.
CONFIG: TX: TX-IF
TX-IF:
TX FREQ=1200.0000MHz SPECTRUM INVERT=OFF
Three TX settings can be set from this menu. Select the parameter to edit using the [←]
[→] arrow keys.
The options for the TX carrier are shown in parentheses. To change the setting use the [↑]
[↓] arrow keys. Select either ON, OFF, or RTI, then press ENTER.
NONE
IBS (FAST option)
IDR (FAST option)
DROP (FAST option)
EDMAC
D&I ++ (FAST option) (Version 1.2.0 and greater)
ESC++ (Version 1.3.0 and greater)
NONE
IBS (FAST option)
IDR (FAST option)
INSERT (FAST option)
EDMAC
D&I ++ (FAST option) (Version 1.2.0 and greater)
ESC++ (Version 1.3.0 and greater)
CARRIER = ON (ON,OFF,RTI)
SCRAMBLER
SYMBOL=00064.000ksym
6–8
Revision 2
MN/CDM600L.IOM