Table of Contents
Advertisement
CDM-600L Satellite Modem
Front Panel Operation
CONFIG: MASK: SATELLITE ALARMS: RX
PROCESS ALARMS RECEIVED FROM SATELLITE
BWA1=N, BWA2=N, BWA3=N, BWA4=N
Select which Rx IDR backward alarms are to be monitored.
CONFIG: MASK: TERR-ALM
TERR-ALM: TX = ACTIVE
These alarms are only valid for D&I operation.
Use the [←] [→] arrow keys to select the parameter to edit. Edit the alarms using the [↑]
[↓] arrow keys, then press ENTER.
6.3.1.12
CONFIG: STATISTICS
LINK STATISTICS LOGGING INTERVAL:
Edit the logging interval (the period of time over which the statistics will be measured),
using the [↑] [↓] arrow keys, then press ENTER. Setting a value of 00 disables the feature
(no logging).
The user can choose 00, 10, 20, 30, 40, 50, 60, 70, 80, or 90 minutes.
For additional information about the statistics data taken, refer to 6.3.4.3 Monitor
Statistics.
RX = OFF
00 minutes
(00 TO 90)
(ACTIVE,MASK)
(OFF,ENABLED)
6–27
Revision 2
MN/CDM600L.IOM
Advertisement
Table of Contents
