Table of Contents
Advertisement
8 | HBD7S(X) Camera Configuration Guide
Main Setup Menu
Open the SETUP menu to make changes to camera configuration.
Figure 2
To open the SETUP menu, press down and hold the OSD joystick for two seconds.
Lens
Note
This camera does not have an interchangeable lens. This camera comes with a
DC drive lens only.
1.
Press the joystick to enter the DC LENS menu (see
Figure 3
2.
Set the desired BRIGHTNESS level. Select a value between 1 and 100. The default
setting is 50.
3.
Set the MODE to INDOOR or OUTDOOR, depending on the camera environment.
4.
Select RETURN to save your settings and return to the SETUP menu.
www.honeywell.com/security
Setup Menu
DC Lens Menu
Figure
3).
Advertisement
Table of Contents
