Accessing The Camera; Installing The Ipc Tool Utility; Discovering Your Camera On The Network - Honeywell 30 Series Configuration Manual

2 Accessing the Camera

This chapter contains the following sections:
• Installing the IPC Tool Utility, page 3
• Discovering Your Camera on the Network, page 3
• Assigning a New IP Address to Your Camera, page 4
• Upgrading the Camera's Firmware, page 5
• Accessing the Camera from a Web Browser, page 5

Installing the IPC Tool Utility

To install the IPC Tool utility and create a desktop shortcut:
1. Insert the included Software and Document disc into your PC's disc drive.
2. Install the IPC Tool utility to your

Discovering Your Camera on the Network

To discover your network camera(s), open the IPC Tool utility
password, and then click Connect. Cameras that are online have a green connected icon
next to them. Cameras that are offline have a gray disconnected icon
refresh the list, click Refresh.
PC. The shortcut is added to the desktop.
Accessing the Camera
, enter your user name and
next to them. To
3