Hardware Setup; Create A High Frame Rate 3D File - Christie CP2215 User Manual

View 3D Content
PIN Signal Name
8 3D_INPUT_REFREREN
CE+
9 +12V
10 3D_INPUT_REFREREN
CE-
11 3D_DISPLAY_REFERE
NCE+
12 3D_DISPLAY_REFERE
NCE-
13 CONN_3D_MODE-
14 CONN_SYNC-
15 Not connected

Hardware Setup

Use an infrared emitter to control gating in active glasses, a polarizing Z-screen (Pi-cell) with passive
glasses, or filter wheel with passive glasses.
Installed/
Mounted
Components
Silver Screen
3D Glasses

Create a High Frame Rate 3D File

Use this procedure to create 24Hz, 48Hz, and 60Hz high frame rate 3D files. These files allow you to
display content with different frame rates consecutively.
1. Tap Menu > Advanced Setup > High Frame Rate 3D File Setup.
2. Select a 3D frame rate file in the Current 3D File list.
66
Direction
In
Out
In
In
In
Out
Out
RealD RealD XL
Z-screen Box
Z-screen XL box
mounted in mounted in
front of the front of the
projection projection
lens lens
Yes Yes
Polarizing Polarizing
circular circular
glasses glasses
Description
3D L/R Input Reference (P)
(Voltage Limit: 2 VDC to 12VDC)
Power to 3D system. Maximum 1A (Total between both
+12V pins)
3D L/R Input Reference (N)
(Voltage limit: 1.4VDC to 12VDC)
3D L/R Input Reference (P)
(Voltage limit: 1.4VDC to 12VDC)
3D L/R Input Reference (P)
(Voltage limit: 1.4VDC to 12VDC)
3D mode state from projector. From projector GPO
emitter. Compatible with current projector GPIO
requirements and restrictions. (24VDC max, 50mA max)
SYNC from projector. From projector GPO emitter.
Compatible with current projector GPIO requirements
and restrictions. (24DC max, 50mA max)
Xpand Master
Image
None Wheel
installed in
front of the
projector
No Yes
Active glasses Circular
polarized
glasses
Dual
Projector
Polarizing
plates in front
of lenses
Yes
Polarizing
circular or
linear glasses
CP2215 User Manual
020-101225-01 Rev. 1 (01-2014)