D
Air Filter Cover and Air Filter
Located behind the air filter cover is a replaceable air filter. The air filter filters the
intake air before it begins circulating in the front compartment to cool the main
electronics.
E
Air Intake
F
Projector Lens
See
Accessories
G
Top Lid
Projector Components - Rear
A
Service Access Door
B
Power Cord and AC Receptacle
C
Lamp Access Door
Position the Projector
• Two people are required to safely lift and install the projector.
• Complete a lamp adjust whenever you move or level the projector or replace the lamp.
1. If you are installing the projector in the optional rack stand (P/N 108-416102-XX) follow the
instructions provided with the rack stand to install it.
2. Position the projector so it is centered and parallel with the theatre screen. If space is limited,
aim the projector slightly off-center and use lens offset to center the image on the screen.
CP2215 User Manual
020-101225-01 Rev. 1 (01-2014)
on page 93 for a list of available lenses.
Installation and Setup
4