Access The Projector And Run Diagnostics; The Touch Panel Controller; The Main Screen - Christie CP2215 User Manual

Access the Projector and Run
Diagnostics
This section describes how to access the projector and run projector diagnostic utilities.

The Touch Panel Controller

The TPC is a touch-sensitive screen that you use to control the projector. You can use the TPC to turn
the projector and lamp on or off, select channels, and view status information. The TPC is mounted
on the rear of the projector. You can tilt and turn the TPC to improve the viewing angle. Use the USB
port on the side of the TPC to download log files and install software upgrades. You can disconnect
the TPC from the projector and an optional cable allows you to control the projector from a maximum
distance of 100 feet.
If the TPC fails or is disconnected, press the emergency start button on the communications panel.
This starts the projector, turns the lamp on, and opens the douser. When using the emergency start
button, you cannot change channels.

The Main Screen

Use the Main screen of the Touch Panel Controller (TPC) to access power, lamp, douser, channel, and
test pattern settings.
CP2215 User Manual 29
020-101225-01 Rev. 1 (01-2014)