Log On To The Projector; Led Status Indicators - Christie CP2215 User Manual

Access the Projector and Run Diagnostics
A A green LED indicates that the projector is operating properly. If a monitored system falls below a
normal reading, the LED is yellow or red. A yellow LED indicates a warning, and a red LED indicates
a critical error that you must correct. Click the status LED to open the Status window and resolve
issues.
B
Displays custom projector settings.
C Displays 64 saved channels.
D Turns the projector on or off. Tap off to place the projector in stand-by mode. To prevent accidental
activation, you must tap and hold the on or off buttons. A message displays in the title bar when
the projector turns on or off.
E Turns the lamp on or off. To prevent accidental activation, you must tap and hold the on or off
buttons. A boot delay occurs if you select lamp on before pressing power on.
F Opens or closes the douser.
G
Controls the Intelligent Lens System (ILS) lens motors. Tap to open the ILS File Setup window.
H Selects or disables test patterns. Tap the test pattern icon to open the Preferred Test Patterns
window.
I Tap the Menu button to access projector menus.
J Displays the status of projector functions including the Projector Intelligence Board (PIB), the
Integrated Cinema Processor Board (ICP), Standby Power, Main Power, Run, and Marriage. A green
LED indicates the system is functioning correctly. A red LED indicates a critical error that you must
correct. Click the status LED to open the Status window and resolve issues.

Log On to the Projector

1. Tap Menu > Login.
2. Select a user name in the Username list.
3. Enter the password in the Password field and then tap Login.

LED Status Indicators

Red, yellow, and green LEDs on the rear corners of the projector indicate the operational status of
the projector. The LEDs can be solidly lit, or they can flash frequently or intermittently. This table lists
the LED state its associated meaning.
LED
Solid green
Flashing green
Solid yellow
Flashing yellow or green
30
State
Lamp on
Power on
Standby mode
Cool down mode
Description
Power and lamp are on.
Power is on and the lamp is off. The lamp can be
struck.
Power and lamp are off. Power saving mode.
Moving to standby mode. Power is on and the
lamp is off. The lamp can be struck.
CP2215 User Manual
020-101225-01 Rev. 1 (01-2014)