Huawei Quidway S3000-EI Series Operation Manual page 58

Operation Manual - Port
Quidway S3000-EI Series Ethernet Switches
I. Port Traffic Threshold Configuration Task
Table 1-14 Port traffic threshold configuration task
Enter system view
Enter
view
Configure
threshold on the port
Configure
pattern when actual
traffic
exceeds the threshold
Note:
The prompt character for Ethernet port
II. Port Traffic Threshold Configuration Example
1 ) Configuration requirem
The traffic threshol
is 10 seconds.
The system disables t
port exceeds the spec
2) Config
# Enter system view.
<Quidway>
System View: return to User View with Ctrl+Z.
# Enter Ethernet0/1 port view.
[ Quidway] interface ethernet0/1
# Configure the traffic threshold on the Ethernet0/1 port as 5000 pps and the detection
interval as 10 seconds.
[Quidway-Ethernet0/1] flow-cons
# C nfigure the system to disable the port and send trap messages when actual traffic o
on th e port exceeds the threshold.
[Quidway-Ethernet0/1] flow-constrain method shutdown
Item
<Quidway> system-view
Ethernet port [Quidway] interface { interface_type
interface_num | interface_name }
[Quidway-EthernetX/X]
t raffic
flow-constrain
flow-value {
handling
[Quidway-EthernetX/X]
flow-constrain
on the port
{ shutdown | trap }
ents
d o n the Ethernet0/1 port is
he port and sends trap messages whe
ified threshold.
uration proced ure
system-view
Huawei Technologies Proprietary
Chapter 1 Ethernet Port Configuration
Command
time-value
bps pps | }
method
view may va ry with specific co
5000pps and the detection interval
train 10 5000 pps
1-10
Remarks
–
–
Required
Optional. By
default, the system
only sends trap
messages.
nfiguration.
n actual traffic on the