User-Defined Acl Configuration Example - Huawei Quidway S3000-EI Series Operation Manual

Operation Manual - QoS/ACL
Quidway S3000-EI Series Ethernet Switches
3) Activat
# Activate the ACL traffic-of-link .
[Quidway

1.3.4 User-defined ACL Configuration Example

I. Net working requirements
Using user-defined ACL, filter the TCP packet during time range 8:00 ~ 18:00 every
day .
II. Net working diagram
Figure 1-5 Access control configuration example
II I. Configuration procedure
Note:
In the following configurations, only the commands related to ACL configurations are
listed.
1) Define the time range
# Define time range from 8
[Quidway] time-range huawei 8:00 to 18:00 daily
2) Define the ACL for TCP packet.
# Enter the named user-defined ACL, named a
[Quidway] acl name traffic-of-tcp user
# Define the rules for TCP packet.
[Quidway-acl-user-traffic-of-tcp] rule 1 deny 06 ff 35 time-range huawei
3) Activate ACL.
# Activate the ACL traffic-of-tcp .
[Quidway] packet-filter use
e ACL.
] packet-filter link-group traffic-of-link
#1
Switch
:00 to 18:00.
Huawei Technologies Proprietary
connect to Router
s traffic-of-tcp.
r-group traffic-of-tcp
1-13
Chapter 1 ACL Configuration