Display And Debug Vlan; Vlan Configuration Example - Huawei Quidway S3000-EI Series Operation Manual

Operation Manual - VLAN
Quidway S3000-EI Series Ethernet Switches
Table 1-4 Set/Delete VLAN description character string
Set the description character string for VLAN
Restore the default description of current VLAN
By default, VLAN des

1.3 Display and Debug VLAN

A fter the above configuration, execute display command in any view to display the
running of the VLAN configuration, and to verify the effect of the configuration.
Table 1-5 Display and debug VLAN
Display the related information about
VLAN

1.4 VLAN Configuration Example

I. N etworking requirements
Create VLAN2 and VLAN3. Add Ethernet port 0/1 and Ethernet port 0/2 to VLAN2 and
a dd Ethernet 0/3 and Ethernet 0/4 to VLAN3.
II. Networking diagram
E0/1 E0/1
VLAN2 VLAN2
Figure 1-1 VLAN configuration example
III. Configuration procedure
# Create VLAN 2 and enters its view.
Operation
cription chara cter string is VLAN ID of the VLAN, e.g. VLAN 0001.
Operation
Switch Switch Switch Switch
E0/2 E0/2 E0/3 E0/3
E0/4 E0/4
Huawei Technologies Proprietary
1-3
Chapter 1 VLAN Configuration
description string
undo description
Command
display vlan[ vlan_id | all | static |
dynamic ]
VLAN3 VLAN3 VLAN3 VLAN3
Command