Configure Secondary Vlan; Configure To Map Isolate-User-Vlan To Secondary Vlan - Huawei Quidway S3000-EI Series Operation Manual

Operation Manual - VLAN
Quidway S3000-EI Series Ethernet Switches
Add new ports to isolate-user-vlan
An Ethernet switch can have sever
m ore than one port. isolate-user-vlan
That is to say, you cannot configure a Trunk port on the Ethernet switch already
configured with the isolate-user-vlan, and vise versa. In addition, the Uplink port has to
be added into the isolate-user-vlan.
2.2.2 Con figure Secondary VLAN
You can use the following comm
to it.
Create a secondary VLAN in system view and add new ports to it in VLAN view.
Table 2-2
Create a Secondary VLAN
Add new ports
Y ou can add more than one port (other tha Uplink ports) to a S

2.2.3 Configure to Map isolate-user-vlan to Secondary VLAN

You can use the following command to configure the isolate-user-vlan to map th
Secondary VLAN.
Perform the following configurations in system view.
Table 2-3 Configure to map isolate-user-vlan to secondary VLAN
Configure
isolate-user-vlan to secondary
VLAN
Cancel
isolate-us
VLAN
N ote that, before you execute thi
V LAN shall have ports. You ca
Secondary VLANs.

Configure Secondary VLAN

Operation
to the Seco ndary VLAN
Operation
to map
to map
er-vlan to se condary
Huawei Technologies Proprietary
Chapter 2 Isolate-User-Vlan Configuration
port interface-list
al isolate-us er-vlans, each o
cannot be configured togethe
ands to create a Secondary VLAN and add new ports
vlan vlan-id
port interface-list
n
isolate-user-vlan
secondary secondary_vlan_numlist
secondary_vlan_numlist ]
undo isolate-use
[ secondary se condary_vlan_n
secondary_vlan_nu
s command, the isolate-user-vlan and Secondary
n map an isolate-user-vlan to no more than 30
2-2
f which can include
r with the Trunk port.
Command
econdary VLAN.
Command
isolate-user-vlan_num
r-vlan isola te-user-vlan_num
umlist
mlist ]
e
[ to
[ to