Set The Summer Time; Display The State And Information Of The System - Huawei Quidway S3000-EI Series Operation Manual

Operation Manual - System Management
Quidway S3000-EI Series Ethernet Switches

4.1.4 Set the Summer Time

You can set the name, starting and ending time of the summer time.
Perform the following operations in the user view.
Table 4-4 Setting the summer time
Set the name and range of the summer
time
Remove the setting of the summer time
By default, the summer time is not set.

4.2 Display the State and Information of the System

The display commands can be classified as follows according to their functions.
Commands for displaying the system configuration information
Commands for displaying the system running state
Commands for displaying the system statistics information
For the display commands related to each protocols and different ports, refer to the
relevant chapters. The following display commands are used for displaying the system
state and the statistics information.
Perform the following operations in any view.
Table 4-5 The display commands of the system
Display the system clock
Display the system version
Display the terminal user
Display
saved-configuration
Display
current-configuration
Display the state of the
debugging
Operation
Operation
the
the
Huawei Technologies Proprietary
Chapter 4 System Maintenance and Debugging
clock summer-time
{ one-off | repeating } start-time
start-date end-time end-date offset-time
undo clock summer-time
Command
display clock
display version
display users [ all ]
display saved-configuration
display current-configuration [ controller |
interface interface-type [ interface-number ] |
configuration [ configuration ] ] [ | { begin |
exclude | include } regular-expression ]
display debugging [ interface { interface-name |
interface-type interface-number } ] [ module-name ]
4-2
Command
zone_name