Configure The Running Parameters Of Ftp Server; Display And Debug Ftp Server - Huawei Quidway S3000-EI Series Operation Manual

Operation Manual - System Management
Quidway S3000-EI Series Ethernet Switches
Table 1-11 Configure the FTP Server Authentication and Authorization
Create new local user and enter local
user view(system view)
Delete local user(system view)
Configure password for local user(local
user view)
Configure
user(local user view)
Cancel password for local user(local
user view)
Cancel service type for local user(local
user view)
Only the clients who have passed the authentication and authorization successfully can
access the FTP server.

1.3.4 Configure the Running Parameters of FTP Server

You can use the following commands to configure the connection timeout of the FTP
server. If the FTP server receives no service request from the FTP client for a period of
time, it will cut the connection to it, thereby avoiding the illegal access from the
unauthorized users. The period of time is FTP connection timeout.
Perform the following configuration in system view.
Table 1-12 Configure FTP server connection timeout
Configure FTP server connection timeouts
Restoring the default FTP server connection timeouts
By default, the FTP server connection timeout is 30 minutes.

1.3.5 Display and Debug FTP Server

After the above configuration, execute display command in any view to display the
running of the FTP Server configuration, and to verify the effect of the configuration.
Operation
service type for
Operation
Huawei Technologies Proprietary
1-7
Chapter 1 File System Management
local-user username
undo local-user [ username | all
[ service-type ftp ] ]
password [ cipher | simple ] password
local
service-type ftp ftp-directory directory
undo password
undo service-type ftp [ ftp-directory ]
Command
Command
ftp timeout minute
undo ftp timeout