Displaying And Debugging Dhcp Client Configuration - Huawei Quidway S3000-EI Series Operation Manual

Operation Manual - Network Protocol
Quidway S3000-EI Series Ethernet Switches
3.2.1 Con figuring a VLAN Interface to Obtain IP Address Us
Perform the following configuration in VLAN interface view.
Table 3-1 Configuring a VLAN interface to obtain IP address using DHCP
Configure VLAN interface to obtain IP
address using DHCP
Remove the config
B y default, the VLAN interfac

3.3 Displaying and Debugging DHCP Client Configuration

After the above configuration, execute display command in any view to display the
running of the DHCP Client configuration, and to verify the effect of the configurat
Execute debugging command in user view to debug DHCP Client configuration.
Table 3-2 Displaying and debugging DHCP Client configuration
Display
information of DHCP client
Enable/dis
debugging
Operation
uration
e does not obt
Operation
address allocation
able DHC P client
Huawei Technologies Proprietary
Chapter 3 DHCP Client Configuration
ip address dhcp-alloc
undo ip address dhc
ain IP address using DHCP.
Command
display dhcp client [ verb
[ undo ] debuggi ng dhcp cli
event | packet }
3-3
ing DHCP
Command
p-all oc
ose ]
ent { all | error |
ion.