Set Speed On The Ethernet Port; Set Cable Type For The Ethernet Port - Huawei Quidway S3000-EI Series Operation Manual

Operation Manual - Port
Quidway S3000-EI Series Ethernet Switches
Note that, 100M electrical Ethernet port can
auto-negotiation mode
T he optical 100M/Gigabit Ethernet ports su
full (full duplex) or auto (auto-negotiation
The Gi gabit electrical Ethernet port can operate in full duplex, half d
a uto-negotiation mode. When the port operates at 1000Mbps, the duplex mode can be
set to full (full duplex) or auto (auto-negotiation).
The port defaults the auto (auto-negotiation) mode.
1.3.2 Set Speed on the Ethernet Port
You can use the following command to set the speed on the Ethernet port. If the speed
is set to auto-negotiation mode, the local and peer ports will automatically negotiate
about the port speed.
Perform the following confi
Table 1-5 Set speed on Ethernet port
Set 100M Ethernet port speed
Set Gigabit Ethernet port speed
Restore the default speed on Ethernet port
Note that, the 100M electrical Ethernet port can operate at 10Mbps, 100Mbps or
auto-negotiated speed as per different
100M optical Ethe
( 100Mbps) or auto (auto-negotiat
T he optical Gigabit Ethernet port su
s et to 1000 (1000Mbps) or auto (auto-negotiation).
The electrical Gigabit Ethernet port can operate at 10Mbps, 100Mbps, or 1000Mbps as
p er different requirements. However in half duplex mode, the port cannot operate at
1000Mbps.
By default, the speed of the port is in auto mode.
1.3.3 Set Cable Type for the Ethernet Port
The Ethernet port supports the straight-through and cross-over network cables. The
following command can be used for configuring the c
Perform the following configuration in Ethernet port view.
, which can be set as per the requirement
gur ation in Ethernet port view.
Operation
requirements.
rnet port sup ports 100Mbps and can be co
ion).
pports the 10
Huawei Technologies Proprietary
1-4
Chapter 1 Ethernet Port Configuration
operate in full-duplex, half-duplex or
pport full dupl ex and can be set to operate
) mode.
Command
speed { 10 | 100 | auto }
speed { 10 | 100 | 1000 | auto }
undo speed
nfigured to o
00Mbps speed and the speed ca
able type.
s.
in
uplex or
perate at 100
n be