Display And Debug Gvrp - Huawei Quidway S3000-EI Series Operation Manual

Operation Manual - VLAN
Quidway S3000-EI Series Ethernet Switches
When an Ethernet port is set to be in Normal registration mode, the dynamic and
manual creation, registration an
When one Trunk port is set as fixed, the system
static VLAN is created on the switch a
GVRP will also add this VLAN item to the local GVRP
GVRP maintenance. Howe
port. The learned dynamic VLAN from other ports of the local switch will not be
able to send statements to outside through this port.
When an Ethernet port is set to be in Forbidden registration mode, all the VLANs
except VLAN1 will be logged out and no other VLANs can be create
registered on this port.
Perf orm the following configurations in Ethernet port view.
Tabl e 3-5 Set GVRP registration type
Set GVRP registration type
Re store the default GVRP
typ e
By default, GVRP registration type is normal.

3.2.5 Display and Debug GVRP

After the above configuration, execute dis
r unning of GVRP configuration, and to verify the effect of the configu
debugging command in user view to debug the configuration of GVRP.
Table 3-6
Display GVRP statistics information
Display GVRP global status information
Enable
debugging
Disable
debugging
Operation
registration
Display and debug GVRP
Operation
GVRP packet or
GVRP packet or
Huawei Technologies Proprietary
Chapter 3 GARP/GVRP Configuration
d logout of VLAN are allowed on this port.
will add the port to the VLAN if a
nd the Trunk port allows the VLAN passing.
ver, GVRP cannot learn dynamic VLAN through this
gvrp registration { normal | fixed |
forbidden }
undo gvrp registration
play comman
display gvrp statistics [ interface
interface-list ]
display gvrp status
event
debugging gvrp { packet | event}
event undo debugging gvrp { packet |
event }
3-5
database, one link table for
Command
d in any view to display the
ration. Execute
Command
d and