Displaying And Debugging Ssh - Huawei Quidway S3000-EI Series Operation Manual

Operation Manual - System Management
Quidway S3000-EI Series Ethernet Switches
Figure 8-5 SSH client interface
1) Key in correct username and password and log into SSH connection.
2) Log out of SSH connection with the logout command.

8.1.4 Displaying and Debugging SSH

Run the display command in any view to view the running of SSH and further to check
configuration result.
Run the debugging command to debug the SSH.
Please perform the following configurations in any view.
Table 8-10 Display SSH information
Display host and server public
keys
Display client RSA public key
Display SSH state information
and session
Display SSH user information
Enable SSH debugging
Enable RSA debugging
Disable SSH debugging
Disable RSA debugging
Operation
Huawei Technologies Proprietary
Chapter 8 SSH Terminal Services
Command
display rsa local-key-pair public
display rsa peer-public-key [ brief | name
keyname ]
display ssh server { status | session }
display ssh user-information [ username ]
debugging ssh server { VTY index | all }
debugging rsa
undo debugging ssh server { VTY index | all }
undo debugging rsa
8-10