Defining Acl; Calling Acl To Control Http Users; Configuration Example - Huawei Quidway S3000-EI Series Operation Manual

Operation Manual - QoS/ACL
Quidway S3000-EI Series Ethernet Switches
2) Calling A
The follow section introduces the configuration procedures.
3.4.1 Defi ning ACL
So far, you can only call the numbered basic ACL, ranging from 2000 to 2999, to
implement ACL control function. Use the s
the last section.
3.4.2 Call ing ACL to Control HTTP Users
To control the WEB network management users with ACL, call the
You can use the following commands to call an ACL
Perform the following configuration in system view.
Table 3-4 Calling ACL to control HTTP users
Call an ACL to control the WEB NM users.
Cancel the ACL control function.
For more about the c
Note
Only the numbered b
3.4.3 Conf iguration
I. Networking requirements
Only permit WEB NM user from 10.110.100.46 access switch.
CL to control HTTP users
Operation
ommands, refer to the Command Manual.
:
asic ACL can be called for WEB NM use
Examp le
Huawei Technologies Proprietary
Chapter 3 Logon User ACL Control Configuration
ame configuration commands introduced in
.
ip http acl acl-number
undo ip http acl
3-6
defined ACL.
Command
r control.