Huawei Quidway S3000-EI Series Operation Manual page 149

Operation Manual - Integrated Management
Quidway S3000-EI Series Ethernet Switches
III. Configuration proced
# Configure IP address pool for the st
[Quidway] stacking ip-pool 129.10.1.1 5
# Enable a stack on Switch A.
[Quidway] stacking enable
# Display stack information on the main
<stack_0.Quidway> display stacking
Main device for stack.
Total members:3
# Display stack member information on the main switch, Switch A.
<stack_0.Quidway> display stacking members
Member number: 0
Name:stack_0.Quidway
Device: Switch A
MAC Address:00e0-fc07-0bc0
Member status:Cmdr
Member number: 1
Name:stack_1.Quidway
Device: Switch B
MAC Address:00e0-fc07-58a0
Member status:Up
Member number: 2
Name:stack_2.Quidway
Device: Switch C
MAC Address:00e0-fc07-58a1
Member status:Up
# Switch to the slave switch, Swi
<stack_0.Quidway> sta
<s tack_1.Quidway>
# Display stack inform
<stack_1.Quidway> display stacking
Slave device for stack.
Member number: 1
Main switch mac address:00e0-fc07-0bc0
# Switch back to the m
<stack_1.Quidway> quit
<stack_0.Quidway>
ure
ack on Switch A.
switch, Switch A.
tch B, to perform the configuration.
cking 1
ation on the slave switch, Switch B.
ain switch, Switch A to perform the configuration.
Huawei Technologies Proprietary
1-4
Chapter 1 Stack Function Configuration