Concluding Steps - Fujitsu PRIMERGY BX924 S4 Upgrade And Maintenance Manual

11.1.3 Concluding steps

V
Note on network settings recovery
When replacing network controllers or onboard CNA, network
configuration settings in the operating system will be lost and replaced
by default values. This applies to all static IP address and LAN teaming
configurations.
Ensure to note down your current network settings before replacing the
controller.
Ê Insert the server blade in the system unit see section
blade in the system unit" on page
Ê Restore the BIOS settings as described in section
on page 78
Ê Restore the iRMC settings as described in section
settings" on page
I
In order to enable ServerView Operations Manager and ServerView
Installation Manager to identify the system, it is necessary to program the
chassis ID prom using the "ChassisIDProm Tool" after installing the new
Server Blade.
BX924 S4
57.
78.
Upgrade and Maintenance Manual
Server blade
"Installing the server
"Restoring BIOS settings"
"Restoring iRMC
273