Installing The Cmos Battery - Fujitsu PRIMERGY BX924 S4 Upgrade And Maintenance Manual

10.1.4 Installing the CMOS battery

Figure 102: Installing the CMOS battery
Ê At a slight angle, fit the new CMOS battery into its socket as shown in the
figure above.
V
CAUTION!
Ensure to insert the CMOS battery with the positive pole (label side)
facing up as shown.
Ê Press on the CMOS battery until it locks in place.
Ê Ensure that the locking spring is properly engaged.
BX924 S4
Upgrade and Maintenance Manual
System board components
229