Shutting Down The Server Blade - Fujitsu PRIMERGY BX924 S4 Upgrade And Maintenance Manual

Basic hardware procedures
4.3

Shutting down the server blade

V
CAUTION!
For further safety information, please refer to chapter
information" on page
Ê Inform the system administrator that the server blade will be shut down and
put offline.
Ê Terminate all applications.
Ê In case of Multipath I/O environments, please refer to section
server maintenance in a Multipath I/O environment" on page
Figure 7: Power button on the front panel
Ê Shut down the server blade by pressing the On / Off button (1). The power
indicator (2) turns off.
I
If the system is running an ACPI-compliant operating system,
pressing the On / Off button will perform a graceful shutdown.
Ê Switch on the ID indicator on the front connector panel of the server as
described in section
52
29.
"Locating the defective server blade" on page
Upgrade and Maintenance Manual
"Important
"Note on
70.
43.
BX924 S4