Removing The Tpm - Fujitsu PRIMERGY BX924 S4 Upgrade And Maintenance Manual

System board components
Ê Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify
settings, refer to the "D3143 BIOS Setup Utility for PRIMERGY
BX924 S4" reference manual available online.
Ê If applicable, open the rack door as described in section
door" on page
Ê Locate the desired server blade as described in section
defective server blade" on page
Ê Shut down the server blade as described in section
server blade" on page
Ê Remove the server blade from the system unit as described in section
"Removing the server blade from the system unit" on page
Ê Open the server blade as described in section
on page 55.

10.3.2.3 Removing the TPM

Ê Remove the system board as described in section
board" on page
Ê Lay the system board on a soft, antistatic surface with its component side
facing down.
Figure 115: Removing the TPM screw from the underside of the system board
Ê Locate the slotted lower end of the TPM screw (see arrow).
Ê Carefully loosen the TPM screw using a thin slotted screw driver (e.g.
watchmaker's screw driver) or the dedicated TPM screw driver (Japanese
market).
252
51.
43.
52.
266.
Upgrade and Maintenance Manual
"Opening the rack
"Locating the
"Shutting down the
54.
"Opening the server blade"
"Removing the system
BX924 S4