Replacing Processor Heat Sinks; Removing The Processor Heat Sink; Applying Thermal Paste; Installing The Processor Heat Sink - Fujitsu PRIMERGY BX924 S4 Upgrade And Maintenance Manual

9.5.6

Replacing processor heat sinks

9.5.6.1

Removing the processor heat sink

Ê Remove the processor heat sink as described in section
processor heat sinks" on page
9.5.6.2

Applying thermal paste

Ê Apply thermal paste to the processor surface as described in section
"Applying thermal paste" on page
9.5.6.3

Installing the processor heat sink

Ê Install the processor heat sink as described in sections
sink and processor" on page 213
page 214.
9.5.7

Concluding steps

Perform the following procedures to complete the task:
Ê If memory modules have been removed, install the memory into their original
location as described in section
Ê Close the server blade as described in section
page 56.
Ê Reinstall and secure the server blade in the system unit as described in
section "Installing the server blade in the system unit" on page
BX924 S4
219.
222.
and
"Installing a memory module" on page
Upgrade and Maintenance Manual
"Installing the heat sink for CPU 1" on
"Closing the server blade" on
Processors
"Removing
"Preparing the heat
161.
57.
221