Fujitsu PRIMERGY BX924 S4 Upgrade And Maintenance Manual page 20

Before you start
Replacing a defective component
The global error indicators on the front side of the server as well as local
diagnostic LEDs on the front panel report defective hardware components that
need to be replaced. For further information on the controls and indicators of
your server, refer to the "PRIMERGY BX924 S4 Server Blade Operating
Manual" and section "Connectors and indicators" on page 278.
If the system has been powered off in order to replace a non-hot plug unit, a
system of PRIMERGY diagnostic indicators guides you to the defective
component. The "Indicate CSS" button enables the indicator next to the
defective component even if the server has been switched off and disconnected
from the mains. For further information, please refer to sections "Using
diagnostics information" on page 41 and "Connectors and indicators on the
front panel" on page 283.
If the defective component is a customer replaceable unit included in the CSS
concept (Customer Self Service, only available for EMEA market), the CSS
indicators on the front of the server will light up.
For further information, refer to the "ServerView Suite Local Service Concept
(LSC)" manual available online at http://manuals.ts.fujitsu.com (EMEA market) or
(Japanese market).
http://jp.fujitsu.com/platform/server/primergy/manual/
It is recommended to prepare local maintenance tasks using remote diagnostics
procedures, as described in the "ServerView Suite Local Service Concept
(LSC)" manual.
20 Upgrade and Maintenance Manual
BX924 S4