Fujitsu PRIMERGY BX924 S4 Upgrade And Maintenance Manual page 42

Basic hardware procedures
1
Figure 2: Connectors on the management blade
Ê Connect the FST to the management LAN connector. Customers must use
the Up port (4) while the Down port (5) is reserved for service personnel.
I
– If two management blades are installed, connect the FST to the
master management blade. The status indicator of the master
management blade glows yellow.
– The FST must be on the same LAN with the same subnet as the
management LAN port.
Ê Launch a web browser and enter the Management Agent Administrative URL to
login to the management blade web interface. For further information, refer
to the "PRIMERGY BX900 Blade Server Systems ServerView Management
Blade S1 User Interface Description" or "PRIMERGY BX400 Blade Server
Systems ServerView Management Blade S1 User Interface Description".
I
If you don't know the Management Agent Administrative URL, proceed
as follows.
Ê Connect the FST to the serial port of the management blade (3)
and open a terminal session, see the "PRIMERGY BX900 Blade
Server Systems ServerView Management Blade S1 User
Interface Description" or "PRIMERGY BX400 Blade Server
Systems ServerView Management Blade S1 User Interface
Description".
Ê Open the Management Agent – Management Agent Information menu
to view the Management Agent Administrative URL.
Ê Login to the management blade web interface as described
above.
42
2 3
Upgrade and Maintenance Manual
4 5
BX924 S4