Overview Of The Disk Mounting Kits - Fujitsu PRIMERGY BX924 S4 Upgrade And Maintenance Manual

Hard disk drives / Solid state drives
6.2

Overview of the disk mounting kits

The HDD/SSD modules are mounted into mounting kits, consisting of
– a mounting frame
– a backplane (PCH or SAS) and
– the HDD/SSD module
The mounting kits are placed at their respective mounting locations (see section
"Locations of the drives inside the server blade" on page
There are two kinds of disk mounting kits available:
An SAS disk mounting kit (see pos. #1-2 in
●
A PCH (SATA) disk mounting kit (see pos. #4-5 in
●
The following figure shows both kinds of kits together with a HDD/SSD module
(see pos. #3 in figure
Figure 15: SAS and PCH disk mounting kits for PRIMERGY BX924 S4 server blades
# Description
1 SAS mounting frame for SSD 0
2 SAS mounting frame for HDD/SSD 1
3 HDD/SSD module
4 PCH (SATA) mounting frame for SSD 0
5 PCH (SATA) mounting frame for HDD/SSD 1
98
15):
Upgrade and Maintenance Manual
100.
figure 15)
figure 15)
BX924 S4