Preliminary Steps - Fujitsu PRIMERGY BX924 S4 Upgrade And Maintenance Manual

9.2.2

Preliminary steps

Before installing a processor, perform the following steps:
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê Disable boot watchdog functionality as described in section
watchdog functionality" on page
Ê If applicable, open the rack door as described in section
door" on page
Ê Locate the desired server blade as described in section
defective server blade" on page
Ê Shut down the server blade as described in section
server blade" on page
Ê Remove the server blade from the system unit as described in section
"Removing the server blade from the system unit" on page
Ê Open the server blade as described in section
on page 55.
Ê If CPU 2 has to be installed, remove the "dummy heat sink" (plastic SSD
holder) as described in section
on page 220.
BX924 S4
66.
51.
52.
"Removing the "dummy heat sink" of CPU 2"
Upgrade and Maintenance Manual
67.
43.
"Opening the server blade"
Processors
"Disabling BitLocker
"Disabling boot
"Opening the rack
"Locating the
"Shutting down the
54.
175