Preliminary Steps - Fujitsu PRIMERGY BX924 S4 Upgrade And Maintenance Manual

10.3.3.2 Preliminary steps

Before replacing the TPM, perform the following steps:
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê If applicable, open the rack door as described in section
door" on page
Ê Locate the desired server blade as described in section
defective server blade" on page
Ê Shut down the server blade as described in section
server blade" on page
Ê Remove the server blade from the system unit as described in section
"Removing the server blade from the system unit" on page
Ê Open the server blade as described in section
on page 55.
Ê Remove the system board as described in section
board" on page
BX924 S4
66.
51.
52.
266.
Upgrade and Maintenance Manual
System board components
43.
"Opening the server blade"
"Disabling BitLocker
"Opening the rack
"Locating the
"Shutting down the
54.
"Removing the system
255