Fujitsu PRIMERGY BX924 S4 Upgrade And Maintenance Manual page 77

iRMC recovery procedure
The iRMC recovery is performed via the FlashDisk menu executed from a
bootable USB memory stick. For detailed information refer to the "Integrated
Remote Management Controller" user guides available online.
I
For the Japanese market, follow the instructions provided separately.
Ê Shut down the server blade as described in section
server blade" on page
Ê Connect the monitor, keyboard, mouse and the bootable USB memory stick
to the port on the front of the server blade using the Y cable, see the
Operating Manual.
Ê Switch on the server blade while as described in section
server blade" on page 60
After completion of the boot operation, the FlashDisk menu opens.
Ê Select Recovery _L to carry out the recovery flash for firmware image 1 (low
firmware image).
Ê Select Recovery _U to carry out the recovery flash for firmware image 2 (high
firmware image).
Ê Once the update operation has been completed, click on Exit, to close the
FlashDisk menu.
Ê Shut down the server blade as described in section
server blade" on page
Ê Remove the Y-cable.
Ê Switch on the server blade as described in section
blade" on page
Ê You can now put the server blade back into operation.
BX924 S4
52.
to boot from the USB memory stick.
52.
60.
Upgrade and Maintenance Manual
Basic software procedures
"Shutting down the
"Switching on the
"Shutting down the
"Switching on the server
77