Enabling Boot Watchdog Functionality - Fujitsu PRIMERGY BX924 S4 Upgrade And Maintenance Manual

Basic software procedures
5.2.8

Enabling boot watchdog functionality

If boot watchdog functionality has been disabled for firmware upgrade purposes
(see section "Disabling boot watchdog functionality" on page
enabled to complete the maintenance task.
Timer settings can be configured using the management blade web interface:
Configuring boot watchdog settings in the BIOS
Ê Open a virtual console for your server blade as described in section
"Launching a video redirection to a server blade" on page
Ê Switch on or restart your server blade.
Ê As soon as the startup screen appears, press the [F2] function key to enter
the BIOS.
Ê Select the Server Mgmt menu.
Ê Under Boot Watchdog set the Action setting to Reset.
Ê Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify settings,
refer to the "D3143 BIOS Setup Utility for PRIMERGY BX924 S4"
reference manual.
Configuring boot watchdog settings using the management blade web
interface
Ê Enter the management blade web interface.
Ê Open the Components – System – Server Blades – Server Blade-x menu for the
desired server blade.
Ê Select the Configuration tab and scroll to the ASR box.
Ê Activate the Enable Watchdog option.
Ê Click Apply for the changes to take effect.
I
For more detailed information, refer to the Help – On Page function of the
management blade web interface.
84 Upgrade and Maintenance Manual
67), it has to be re-
63.
BX924 S4