Concluding Steps - Fujitsu PRIMERGY BX924 S4 Upgrade And Maintenance Manual

9.2.4

Concluding steps

Perform the following procedures to complete the task:
Ê Install the processor heat sink onto the processor as described in section
"Installing processor heat sinks" on page
Ê Close the server blade as described in section
page 56.
Ê Reinstall and secure the server blade in the system unit as described in
section "Installing the server blade in the system unit" on page
Ê If applicable, close the rack door as described in section
door" on page
Ê If available, update the system board BIOS and the iRMC to the latest
version as described in section
BIOS and iRMC" on page
Ê Enable boot watchdog functionality as described in section
watchdog functionality" on page
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page
Ê Enable the replaced processor as described in section
components in the system BIOS" on page
BX924 S4
62.
"Updating or recovering the system board
73.
Upgrade and Maintenance Manual
211.
"Closing the server blade" on
84.
91.
85.
Processors
57.
"Closing the rack
"Enabling boot
"Enabling
"Enabling replaced
185