6.3.6
Concluding steps
Perform the following procedures to complete the task:
Ê Close the server blade as described in section
page
56.
Ê Reinstall and secure the server blade in the system unit as described in
section
"Installing the server blade in the system unit" on page
Ê If applicable, close the rack door as described in section
door" on page
Ê Please observe the notes on RAID rebuild in section
array rebuild" on page
BX924 S4
62.
92.
Upgrade and Maintenance Manual
Hard disk drives / Solid state drives
"Closing the server blade" on
"Performing a RAID
57.
"Closing the rack
107